![]() |
|
Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
Thread Tools | Rate Thread | Display Modes |
#1
|
|||
|
|||
337 SN0127 Restoration
Need some help identifying a contactor on my fire wall. its not suppling power to any system and not in parts or any other documents I can find. Contactor is located on the center to Right side on firewall. Any Ideas?
Secondly: My aircraft is a 1965 model. However it has alternators instaled. Should the Circuit Breakers be changed out to a diffrent amp rating? I think my aircraft came with generators as the CB panel is labled GEN Front and Rear. And Last: Anyone out there changed the breakers out to the push pull type, If so what model fit in the space provided. Its been a long drawn out process for this restoration. However we are almost ready for paint. Special thanks to this site and Don Niesner. GMPoland
__________________
GM Poland |
#2
|
||||
|
||||
A photo and some wire numbers going to the relay would help in determining this.
Dave |
#3
|
|||
|
|||
Your aircraft came with 30 amp alternators and the switches were labeled gen.
|
#4
|
|||
|
|||
![]() I just spent the after noon visiting with a very gracious Don Niesner. He was helpful with all my questions and very patient to let me look at the selection of 02and 337 parts he has on hand. My extra contactor is from a prieviously instaltion of a spray kit.
__________________
GM Poland |
![]() |
Thread Tools | |
Display Modes | Rate This Thread |
|
|